The SRCC48 Controller is the important device for the SLC System of the Lighting Control Panel. This device features the Stand Alone function of Lighting Control Panel and it executes the continuous lighting control function even the data-line or central monitoring panel fails.

This SRCC48 Controller is able to mutual GLOBAL interlocking control that is connected for Max. 500 EA at data-line which is connected to SRLINK device. Also, it memories the on-site operation status which is stored at Memory Chip itself of device and when it is needed, it can Uploading to the central computer.

When the central computer lost its program because of virus, it can Upload the lost data from Controller and also it can Back up the data to program. This SRCC48 has the function to control the Max. of 48 Relays. The each relay is consist of 3 Points of ON/OFF status and when the 48 * 3 = 144 points and add 14 EA sensor input terminal will control the Max. of 160 points.

Also, this SRCC48 Controller is ready with RS232

•Applied Programable EEPROM.
•Processing is possible with CPU is 16BIT
(Expansion is able)
•ONECHIP Processing
•TLC Protocol Enable
•Control the Mother Board and 12 Circuit Module.
•Connect the SRCC48 + 4 SRDC12 to use
•CAN communication for Module to Module
•Simplifying the Data-Line when configuring with 12 Circuits over.
•Within 12 Circuit Module, it is included with CONTROL, TLC communication and CAN communication internal.
•Connects at TLC Network, at low-level, connect with CAN Communication
•Performs the Schedule, Dimming and Group Control.
•With Stand alone type’s Lighting Control Panel, it is internal with 32bit Processor.
•By the Peer to Peer method, the relay of panel is able to control with individual and group by the input terminal of other panel.
•The individual programming is possible for local control panel.
•It counts the operation number and Run-Time of Relay, to monitor the Life Cycle of Relay and Energy Usage of Lighting load.
•The Lighting Board is configured as small