OSC10-RMW occupancy sensor is a multi-tech sensor that has two detection functions: infrared radiation and ultrasonic waves. The maximum detection range is 92.9m2. There are adjustment switches on the sensor that delay the sensor's operation and adjust the detection range.

Small sensor size.
Maximum detection range of 92.9m2, with 360-degree detection direction.
Adjustment switches for delayed operation and detection range selection.
Simple installation with a small ceiling mount.

This sensor is connected to the DI input of a relay module or lighting control panel, which activates the corresponding relays. To prevent frequent operation of the sensor, there is an adjustment switch on the sensor that sets the delay time for up to 30 minutes. When a person is detected, the sensor operates immediately, and when the person moves out of the detection range, the relays are not immediately turned off, but wait until the set time has elapsed before turning off.

Passive Infrared.
Mount: Ceiling
Detection range: 92.9m2
Pattern Degrees: 360 degrees
Adjustment: Self-Adjustment
Isolated Relay: Yes
Manual Time Adjustment: 30 seconds - 30 minutes, with a 6-second test mode
Input voltage: 24VDC
Current consumption: 15mA
Operating conditions: 0 - 40°C, 0 - 90%
Certification: CUL/US (Listed 9034), ANCE, ASHRAE, FCC