6uDM is an integrated control module that can control 6 RELAY ON/OFF and 6 channels of 010V dimming control. It is connected to the SCU via ETLC communication and performs scheduling and ON/OFF operation, ON/OFF status display, RELAY group control, time zone scheduling control, sunrise/sunset scheduling control, and other functions through the ETLC protocol. It stores data on the operation log and runtime of the relay. In particular, this 6uDM can be expanded by installing a detachable Latching Relay + 0~10V dimming integrated module on the 6uDM, allowing it to be used for up to 48 times.

LED status indicators display the status of each relay, and the LED flicks when there is a relay failure. It is connected to the data line via a full 2-wire bus, and control is possible even during operations such as downloading and modifying the database. Each control panel can operate as a global stand-alone unit, and it continues to run even in the event of a central control system failure. A 16A Latching Relay + 0~10V dimming integrated module is installed and used in the 6uDM. It can be applied to up to 999 connections to the SCU (communication device), and can be expanded up to a maximum of 48 times using CANbus.

The relay module is connected using a full 2-wire communication method, and when each relay module is installed vertically, a pathway is available for the up and down data lines to connect, allowing the data line cable to be neatly concealed without being visible from the outside.

6uDM is designed to perform integrated control through program with up to 999 connections to a single SCU. Each relay module is designed as a structure that combines a control board, relay drive board, and communication board. When the lower case cover is pulled forward, the data communication connector is ready to be connected, allowing for necessary connections to be made and used. LED indicators are provided to display the status of each relay and drive board, and the relay is attached to the board through a connector for use. The high and low voltage lines are processed inside the case cover for neat wiring and cable management. A 25Ampere Latching Relay equipped with an on/off switch for on-site operation is attached to the board in DIN RAIL format for use. With its new design and compact size, it is suitable for various applications including large and small projects. Up to 48 ON/OFF circuits and 0-10V dimming circuits can be used.

6ea - LED Status Indicators
6ea – 16A Latching Relay + 0~10V Dim Port
Full 2-Wire Communication
Address Setting : 1-999
32Bit Stand Alone Processor
Operation Condition : -10 ~ 60°C
AC/DC24V, 50/60Hz, 7VA